Searching for vinyl flooring trends 2027 turns up plenty of colour boards and very little about how a vinyl plank is built. This page takes the second route. It sets out what the 2027 industry surveys say about wood-look floors, then turns the rest into three checks you can run on any SPC or LVP listing today: wear layer, headline thickness and plank width. The counts and price ranges in the three tables cover the 87 SPC floors listed as in stock in our vinyl flooring collection, while the box prices and per-floor prices come from six of them. If you want the all-material forecast first, start with our post on what flooring will be in style in 2027.
Quick answer: three checks before you buy vinyl plank for 2027
None of the survey lines quoted below is about vinyl wear layers, core thickness or plank width, so this page does not claim that buyers are moving toward any of them. What you can do is compare the three specs that sit on a typical SPC listing, and our catalogue shows how the range splits on each:
- Wear layer: 43 of the 87 floors are 12 mil and 37 are 20 mil, while 7 have no value in our wear-layer field and one of them names 20 mil in its title.
- Headline thickness: titles name anything from 4mm to 10mm, and 10mm is the largest group at 24 floors.
- Plank width: 35 titles name 5.9 in, 24 name 7.09 in and 28 name neither.
Price per square foot across all 87 runs from $1.89 to $7.06, and the decision sections below show the range inside each group.
What the 2027 reports say about wood-look floors, and where they stop
The most useful source for the wood-look category is the National Wood Flooring Association's 2027 Industry Outlook, reported in Hardwood Floors magazine. The report rests on an online survey of NWFA members and Hardwood Floors magazine readers. One line names vinyl-type products directly: "Competition from wood-look products such as LVT, WPC, and laminate continues to affect real-wood flooring sales, with 61 percent of respondents reporting a negative impact." LVT, WPC and laminate are grouped together there, so the line shows how the category looks to industry members. It does not tell you what vinyl buyers will pick next year.
The same report adds that there are "signs that consumers are questioning the long-term performance of wood-look products" and that "About 68 percent of respondents said customers express concerns occasionally or frequently about quality or durability." Those are survey respondents describing what they hear, not test results. They do explain why a wear-layer number deserves a line on your checklist.
A second source is Anderson Tuftex's 2027 Floor Forecast. The company partnered with The Harris Poll to survey high net worth homeowners and interior designers in the U.S. Among homeowners it reports "nearly 7 in 10 valuing flooring that lasts 15+ years". On colour, it says that "Hardwood continues to lean warm and natural, with 37% of homeowners favoring warm natural and honey tones". That colour figure is about hardwood, and it comes from American respondents, not from Toronto households.
For a plain description of the layer itself, Karndean's Art Select page lists a "Clear PVC-Embossed Wear Layer" and says it provides "protection from everyday wear and tear". Karndean is a different brand from the floors below, and its page is a manufacturer description rather than a test.
Six SPC floors from our vinyl collection, with live prices
These six planks are a hand-picked sample of the 87, and they span four headline thicknesses. Price per square foot is the box price divided by the square feet in the box, rounded to the cent. The width and pad columns repeat what each product title says.
| Floor | Thickness | Wear layer | Width in title | Pad in title | Box price / coverage | Per sq ft |
|---|---|---|---|---|---|---|
| Riche Warm Mocha Oak | 6mm | 12 mil | 7.09 in | IXPE | $44.68 / 23.64 sq ft | $1.89 |
| Riche Dark Roast Walnut | 8mm | 20 mil | Not named | Not named | $37.24 / 16.55 sq ft | $2.25 |
| Riche Reclaimed Barnwood | 9mm | 12 mil | 5.9 in | EVA | $32.96 / 13.79 sq ft | $2.39 |
| Riche Golden Harvest Oak | 9mm | 20 mil | 7.09 in | EVA | $35.31 / 14.18 sq ft | $2.49 |
| Riche Nordic Breeze Oak | 9mm | 20 mil | 7.09 in | EVA | $35.31 / 14.18 sq ft | $2.49 |
| Riche Ultra-Thick Tobacco Oak | 10mm | 20 mil | Not named | Not named | $39.60 / 11.82 sq ft | $3.35 |
Prices checked October 30, 2026. Box prices and coverage come from our current catalogue.
Warm Mocha Oak is the lowest-priced of the six at $1.89 per sq ft and Tobacco Oak is the highest at $3.35, a spread of $1.46. Golden Harvest Oak and Nordic Breeze Oak carry identical prices. Compare per square foot rather than per box: the Warm Mocha box is the dearest of the six at $44.68, yet it covers the most floor.
Decision 1: which wear layer to buy
Our product data tags the 12 mil floors Residential and the 20 mil floors Commercial / Heavy Duty, and the stock splits close to evenly between the two.
| Wear-layer field in our product data | In-stock floors | Price per sq ft |
|---|---|---|
| 12 mil | 43 | $1.89 to $2.45 |
| 20 mil | 37 | $2.25 to $3.35 |
| No value | 7 | $3.12 to $7.06 |
The 7 floors with no value in the wear-layer field reach $7.06 per sq ft, well above the other two groups. One of them gives 20 mil in its product title, so ask us what the rest carry before you compare them.
The cleanest price comparison sits at 9mm, where we have both layers. Riche Reclaimed Barnwood at 12 mil costs $2.39 per sq ft and Riche Golden Harvest Oak at 20 mil costs $2.49, so the thicker layer adds $0.10 per sq ft. The two also differ in colour and in title width, 5.9 in against 7.09 in, so take the gap as a hint rather than a controlled test.
Whether $0.10 is worth paying depends on the room. Our 12 mil vs 20 mil comparison works through that question room by room.
The 12 mil and 20 mil ranges overlap between $2.25 and $2.45, which tells you that wear layer is only one of the things moving the price. Thickness and coverage per box move it too, and the next section takes those two in turn.
Decision 2: how thick a plank to buy
Headline thickness varies more across the range than the six priced floors show. The table counts each floor by the thickness its title names; for 10 of the 11 floors titled 6.5mm our thickness field reads 7mm instead, so the table follows the titles.
| Thickness in the title | In-stock floors | Price per sq ft |
|---|---|---|
| 4mm | 1 | $3.12 |
| 5mm | 2 | $3.29 to $3.49 |
| 5.5mm | 1 | $3.69 |
| 6mm | 9 | $1.89 |
| 6.5mm | 11 | $1.99 to $3.99 |
| 7mm | 1 | $7.06 |
| 8mm | 20 | $2.15 to $5.99 |
| 9mm | 18 | $2.39 to $2.49 |
| 10mm | 24 | $3.29 to $3.35 |
Among the six priced floors, headline thickness runs from 6mm to 10mm, and price per sq ft rises at every step: $1.89 at 6mm, $2.25 at 8mm, $2.39 to $2.49 at 9mm and $3.35 at 10mm. Box coverage runs the other way. The 6mm box holds 23.64 sq ft and the 10mm box holds 11.82 sq ft, exactly half as much. That is why the 6mm Warm Mocha box costs the most of the six yet works out to the lowest price per sq ft.
Across all 87 floors the price pattern is looser: the 8mm group alone runs from $2.15 to $5.99, so thickness is not a price guide by itself.
A 200 sq ft room shows what this does to the order. Adding the 5% waste allowance gives 210 sq ft. Dividing by the box coverage and rounding up to whole boxes, Warm Mocha needs 9 boxes ($402.12 before HST) and Tobacco Oak needs 18 boxes ($712.80 before HST). That is $310.68 more in material for the thickest plank, with installation quoted separately.
The thickness on a listing is a headline figure. Whether it counts the core alone or the pad as well is explained in our guide to core versus total thickness. Three of these titles name an EVA pad and one names an IXPE pad. The 8mm and 10mm titles name none, so ask us whether underlay is needed before you budget for those two.
Decision 3: plank width, as the product title states it
We read width from the product title because that is the figure each listing prints in its heading. The last row of the table groups every title that names some other width or none at all.
| Width in the title | In-stock floors | Price per sq ft |
|---|---|---|
| 5.9 in | 35 | $2.15 to $5.99 |
| 7.09 in | 24 | $1.89 to $2.49 |
| Neither | 28 | $2.25 to $7.06 |
Among the six priced floors, three titles name 7.09 in, one names 5.9 in (Reclaimed Barnwood) and two, Dark Roast Walnut and Tobacco Oak, name no width at all. If width changes your layout, confirm it with us before ordering those two.
Width does not set the price on its own in this sample. The three 7.09 in floors run from $1.89 to $2.49 per sq ft depending on thickness and wear layer, while the 5.9 in floor sits at $2.39. What a wider board does inside a room is covered in our comparison of 5.9 in and 7.09 in SPC planks, so that stays there.
Reclaimed Barnwood and Golden Harvest Oak share a thickness but differ in wear layer, title width and price. Golden Harvest Oak and Nordic Breeze Oak match on all three and on price, so for those two the colour is the main decision.
Which of the six fits which priority
- Lowest price per sq ft: Warm Mocha Oak at $1.89, which is 6mm and 12 mil.
- 20 mil at the lowest price of the six: Dark Roast Walnut at $2.25 in 8mm.
- 9mm and 20 mil with a 7.09 in title: Golden Harvest Oak or Nordic Breeze Oak, both at $2.49.
- Thickest plank: Tobacco Oak at 10mm and $3.35.
Series and brand differences are a separate decision, and our guide to SPC vinyl plank brands covers them.
Whichever listing you read, check that the wear layer is given in mil, that the thickness says what it includes and that the width is stated. A listing that answers all three lets you compare per square foot without guessing.
Questions about vinyl plank in 2027
What will LVP and SPC flooring look like in 2027?
The sources quoted above describe wood-look products as a group and hardwood colour among American respondents, and none of them forecasts a vinyl look. A claim about 2027 vinyl styling would go past what they say, so this page compares the specs on today's listings and leaves styling predictions out.
Which wear layer should I pick for vinyl plank I am buying now?
Begin with the labels in our product data, Residential for 12 mil and Commercial / Heavy Duty for 20 mil. At 9mm the gap between our two examples is $0.10 per sq ft, so if your favourite colour comes in both, compare the two boxes directly.
Does a thicker SPC plank cost more per square foot?
Among these six it does. The 6mm plank is the lowest-priced and the 10mm plank the highest, a $1.46 spread per sq ft. Judge by price per sq ft rather than box price, because box coverage ranges from 11.82 to 23.64 sq ft.
Where do I find the plank width of an SPC floor?
On our listings the width is printed in the product title when it is stated at all. Four of the six titles here give one and two do not, so message us with the colour name before you order if the width matters to you.
Are these SPC floors waterproof?
Our product data lists all six as waterproof: Yes. If the floor is going into a basement or a wet room, tell us about the subfloor when you request a quote.
Get a vinyl plank quote in Toronto and the GTA
Send us your room sizes and the colours you are weighing, and we will price the boxes with the waste allowance included so you can compare real totals. You can request a quote online and we will take it from there.
Top Floorings Depot
3781 Victoria Park Avenue, Unit 1, Toronto, ON M1W 3K5
www.topfloorings.com
Call: 416-499-0117
Text: 416-770-8819