Buying advice

Gaps and Separation in Vinyl Plank or Laminate 1 to 3 Years After Install: Causes and Who Is Responsible

Why click-lock vinyl plank and laminate can open up between planks a year or two after installation, what you can check yourself, and what manufacturers' documents ask of an owner making a claim.

Riche Coastal Grey SPC vinyl planks in smooth light grey wood grain
Riche Coastal Grey SPC vinyl planks in smooth light grey wood grain
In this article

Gaps in vinyl plank flooring after install, or in a laminate floor, can mean something is holding the floor in place, pulling it apart or failing to keep the joints closed, and a photo rarely shows which. This page covers seams that open sideways between planks a year or two after installation: the causes manufacturers' own documents name, and how a claim gets decided. If the floor needs replacing in the end, our vinyl plank collection shows current box prices.

Quick answer: causes, fixes and who to call

  • Causes: a floor pinned by trim, cabinets or heavy furniture, swings in room climate, locks that were not fully closed or were damaged during installation, a subfloor problem, or a product defect. Someone has to inspect the floor to say which.
  • What you can do: measure and photograph first, check what is pinning the floor, and hold off on filler, glue or a hammer until the manufacturer or installer has seen the joint.
  • Who is responsible: the documents quoted here do not decide that in advance. EGGER's guarantee ties a claim to installation that follows its instructions, a guarantee card and proof of purchase, and EGGER reserves the right to inspect the floor after a claim is reported. For other brands, read the carton and ask the dealer.
  • Replacement material: a 30 sq ft section costs $74.48 to $98.88 in boxes across the five floors compared below. Labour is not included.

A space where the floor meets the wall is deliberate, and its size belongs to our post on expansion gaps for floating floors. Planks that rise are covered in laminate lifting at the seams and why vinyl plank lifts, and a floor that clicks underfoot in why a floating floor moves.

Six causes of plank-to-plank gaps

Cause What to check first
Floor pinned Nails through trim, cabinets or heavy furniture on the floor
Climate swings Whether the gap is wider in the heating season than in summer
Joints not fully closed Whether gaps follow one row or one stage of the install
Damaged lock profile One joint that keeps reopening, or chips along an edge
Subfloor or preparation Soft or uneven spots, and the installer's written notes
Product defect The box label and lot number on leftover cartons

Restraint: trim, cabinets and heavy furniture

Shaw's COREtec SPC guideline says to "make sure that no plank will be secured in any way to the subfloor". EGGER's guarantee text says "movement should therefore not be blocked or restricted by heavy objects", and Swiss Krono USA says laminate "should not be installed under any stationary or extremely heavy furniture". In practice that points to nails driven through baseboard into the planks, cabinetry set on the floor, and a heavy piece left in one place for years.

Climate and acclimation

The European Producers of Laminate Flooring (EPLF) technical bulletin names "the inherent tendency of wood to expand and contract" in laminate laid as a floating floor. Swiss Krono USA's maintenance FAQ answers a question about gaps between planks in cooler weather by saying "you may need to operate a humidifier".

Swiss Krono Grey Oak MV 803 laminate planks in a weathered grey-brown oak pattern with visible knots
Swiss Krono Grey Oak 10mm laminate at $2.49/sq ft

Acclimation is the installer's side of the same issue: planks "need time to acclimate so that they will fit properly", according to Swiss Krono USA, which prevents gaps or buckling. A gap wider in February than in July is worth recording, because it points to climate before it points to a faulty lock.

Locks that were not closed fully, or were damaged

Shaw's SPC guideline tells the installer to "tap long edge of plank to ensure a tight fit" with a tapping block, and warns that gapping can compromise the locking system. EGGER's instruction says excessive hammering can damage a joint in a way that "may only become apparent later in the course of use", which describes a floor that looked fine on day one. Swiss Krono USA lists "improper tapping tools or techniques" among the causes of chipped joints.

Subfloor and product tolerance

EGGER's instruction says the floor covering contractor must verify "that the subfloor has the required readiness for covering" before installation. Whether a subfloor is flat, dry and firm under a gap cannot be judged from a photo. On tolerance, the EPLF bulletin states that laminate openings "with a maximum width of 0.2 mm are acceptable". The vinyl documents quoted here give no width at which a gap counts as a defect, so for SPC a pro or the manufacturer must inspect the floor.

What you can do yourself, and when to stop

Start with evidence rather than repairs. Mark the ends of a gap with painter's tape, measure its width at several points with a ruler, and write the dates down. Photograph the line where baseboard meets the floor before anyone removes it. Then look for anything pinning the floor; prying up trim or lifting planks is better left to the installer.

Floor gap filler is a common search, but the documents quoted here describe tapping joints shut, not filling them. EGGER's instruction says isolated smaller joints can be "closed by slight, controlled tapping with a tapping block" during installation. On a floor walked on for a year or two, a tap can only close a joint that has somewhere to go, so a gap caused by a pinned floor may return.

Stop and ask for an inspection if gaps appear in several rows, if planks move or chip, or if a joint reopens after you close it. Our post on taking up and reusing click planks explains what survives a lift. If the floor is hardwood instead, our guide on whether to refinish or replace it is the better starting point.

Five click-lock floors we stock and how their joints lock

Gap complaints are easier to sort when you know your floor's thickness and locking system. The locking names come from each product page.

Floor Thickness Locking system on the product page Box price Coverage per box Per sq ft
Riche Coastal Grey (SPC vinyl) 9mm Välinge 5G Drop Lock $32.96 13.79 sq ft $2.39
Riche Blonde Sand Oak (SPC vinyl) 6mm UniPush $44.68 23.64 sq ft $1.89
Riche Nordic Frost (SPC vinyl) 8mm Valinge 5G Drop Lock $37.24 16.55 sq ft $2.25
Swiss Krono Grey Oak MV 803 (laminate) 10mm Valinge 5G $42.83 17.22 sq ft $2.49
Egger EM7206 (laminate) 8mm Valinge Click $40.48 21.42 sq ft $1.89

Prices checked October 31, 2026. Box prices and coverage come from our current catalogue; each per-square-foot figure is the box price divided by the coverage.

Coastal Grey and Nordic Frost name the same drop-lock family, which is the detail to quote when someone asks which lock you have.

Riche Coastal Grey SPC vinyl planks in smooth light grey wood grain
Riche Coastal Grey 9mm SPC vinyl at $2.39/sq ft

The slimmer Blonde Sand Oak names a different system, so a gap complaint on that floor should say so.

Riche Blonde Sand Oak SPC vinyl plank showing a pale golden oak grain and one plank end joint
Riche Blonde Sand Oak 6mm SPC vinyl at $1.89/sq ft

EGGER's installation instruction states its own scope: "The installation instructions apply to all EGGER floors." A Riche or Swiss Krono carton may say something different.

Who is responsible? What the documents ask of each party

This page cannot say who is liable in law, and no document quoted here assigns blame in advance. The documents set conditions, and EGGER's are the clearest to quote.

  • Installation: the guarantee text says "The installation must have been carried out according to the installation instructions" for the floor, and "in cases of non-compliance, all guarantee claims are void". Its list of causes it excludes includes "incorrect or improper installation".
  • Making a claim: the purchaser asserts rights by "presenting the fully completed guarantee card and proof of purchase" to the authorised dealer or to EGGER, "immediately after recognising a damage or guarantee issue". EGGER also reserves the right "to inspect the EGGER Laminate Flooring at the installation location".

EGGER's installation instruction has the installer check the subfloor, so ask for any written concern and the invoice. Under the guarantee, the claim goes to the dealer or to EGGER. Swiss Krono USA asks owners to "keep leftover planks or cartons" in case a section needs replacing later.

Riche and Swiss Krono terms for the floors above are not quoted here. Ask the dealer for the manufacturer's current warranty document, and see our post on what flooring warranties cover for how manufacturer and retailer terms differ. No claim is certain to succeed.

What to gather before you call anyone

  1. Proof of purchase, the installer's invoice and the install date.
  2. The box label from any leftover carton: product name, colour and lot number.
  3. Wide photos of the room, close photos of each gap with a ruler beside it, and the baseboard-edge photos taken before trim comes off.
  4. Gap widths at several points, a rough sketch of where they are, and a list of what stands on or against the floor.

EGGER's text names only the guarantee card and proof of purchase; the rest is practical advice, not a manufacturer requirement.

Replacing a 30 sq ft section: boxes and material cost

Suppose the damage is a strip 10 ft long and 3 ft deep, which is 30 sq ft. We add the same 5% waste allowance we use in quotes, so 30 sq ft x 1.05 is 31.5 sq ft. Boxes are 31.5 divided by the coverage per box, rounded up; material is boxes times box price.

Floor Boxes for 31.5 sq ft Material cost
Riche Coastal Grey 3 boxes $98.88
Riche Blonde Sand Oak 2 boxes $89.36
Riche Nordic Frost 2 boxes $74.48
Swiss Krono Grey Oak MV 803 2 boxes $85.66
Egger EM7206 2 boxes $80.96

Two boxes of Nordic Frost give 33.10 sq ft, so only 1.60 sq ft is left after the strip, and the $74.48 material bill is the smallest of the five. Two boxes of Egger EM7206 laminate give 42.84 sq ft, which leaves 11.34 sq ft of spare planks for a later repair.

Riche Nordic Frost heavy-duty SPC vinyl planks in a pale, light oak finish
Riche Nordic Frost 8mm SPC vinyl at $2.25/sq ft

These numbers cover boxes only. Labour, trim and any subfloor work are not included, and the repair itself is described in our post on replacing one damaged plank.

Frequently asked questions about plank gaps

Are small gaps in vinyl plank flooring after install normal?

For laminate, a trade bulletin treats a hairline opening of up to 0.2 mm as within tolerance. No vinyl document quoted here sets a limit. If you can see underlay or subfloor through a joint, or a gap keeps growing, ask for an inspection.

Can I fill the gaps with a floor gap filler or caulk?

The manufacturer documents quoted here describe closing joints, not filling them. Filler could get in the way of a repair or an inspection, so ask the manufacturer or installer first.

Should I call the installer, the dealer or the manufacturer first?

Start with the installer if the problem looks like workmanship, and with the dealer if you need warranty paperwork. Send each the same photos and measurements.

Will a manufacturer's warranty pay for gaps that open after a year or two?

No one can promise that from outside. EGGER's guarantee depends on compliant installation and correct paperwork, and EGGER reserves the right to inspect the floor. For a Riche or Swiss Krono floor, read the carton and ask the dealer for the current document.

Get a flooring quote in Toronto and the GTA

If you need a section or a whole floor replaced, request a quote with the product name from the box and a short description of what you see.

Top Floorings Depot
3781 Victoria Park Avenue, Unit 1, Toronto, ON M1W 3K5
www.topfloorings.com
Call: 416-499-0117
Text: 416-770-8819

Back to Flooring Guides