Buying advice

Flooring After a Basement Flood or Sewer Backup in Toronto: What to Replace, What Can Stay, and the City Subsidy

A step-by-step order for Toronto homeowners after a basement flood or sewer backup: safety, insurer, removal, drying, the cause, the City's subsidy for prevention work, then a new floor.

Riche Nordic Frost 8mm SPC vinyl plank flooring, product photo
Riche Nordic Frost 8mm SPC vinyl plank flooring, product photo
In this article

If your basement flooded or a sewer backed up, the order you work in matters more than the floor you pick next. This guide covers that order for Toronto homeowners: make the room safe, call your insurer before you throw anything out, remove what cannot be dried, dry the slab, fix the cause, check the City's subsidy for prevention work, and only then choose a floor. We price four in-stock floors, three of them from our SPC vinyl plank collection, so you can budget a 500 sq ft basement.

This is general information, not advice on health, structure or insurance. If the water was sewage, or you are unsure what is safe, bring in a qualified professional.

Quick answer: the order that protects you and your claim

  1. Turn off the power to the flooded area and stay out of standing water.
  2. Call your insurer as soon as possible, then photograph the damage before you discard anything.
  3. Remove flooring that cannot be dried: Health Canada says to discard water-soaked flooring.
  4. Dry the slab and subfloor, and test before any new floor goes down.
  5. Fix the cause: backwater valve, sump pump, weeping tile.
  6. Check the City of Toronto subsidy before you pay for prevention work.
  7. Choose the replacement floor last.

Make the basement safe, then call your insurer before you throw anything out

The Insurance Bureau of Canada (IBC) says that in the case of water damage you should close gas lines and turn off the power, making sure you are not standing in water. Health Canada's flood clean-up infographic puts the electrical step this way: "Shut the power off to the flooded area at the breaker box."

IBC's page on what to do at the time of a loss says: "Call your insurer as soon as possible." Before you call, know whether the water came from a plumbing failure, from outside, or up a drain. The same page tells you not to make permanent repairs before speaking to your insurer, and not to throw out damaged items right away unless they are a health hazard. IBC also advises you to "Take photos of any damaged or destroyed items." Photograph the floor, the waterline and the baseboards before anything is pulled out.

Whether your policy pays is a separate question that only your insurer can answer. IBC says water damage in a basement due to a sewer backup is only covered if you have purchased specific, optional sewer backup coverage, and that every policy is different.

What kind of water it was, and why sewage changes the plan

A burst supply line, rain or groundwater coming in, and a sewer backup are different events, and the answer decides how careful the clean-up has to be. Health Canada's guide to addressing moisture and mould indoors lists floods or significant leaks where the water was contaminated with sewage, or chemical or biological pollutants, among the situations that require the involvement of a qualified professional.

So a sewer backup is not a mop-and-fan job. Call your insurer, and bring in a qualified professional before you start pulling out the floor yourself.

Which floors come out: one verdict per material

Health Canada's infographic is blunt about flooring: "Remove and discard water-soaked flooring." That rule applies to every floor type below. The notes that follow add what manufacturers and trade bodies say, and where they are silent we say so.

Laminate

Swiss Krono, whose laminate appears in the price table below, says on its maintenance FAQ that planks involved with floods caused by exterior water or wastewater are not recommended for re-installation. Swelling from a smaller leak is a different case, covered in our post on water-damaged laminate.

Engineered and solid hardwood

The National Wood Flooring Association's installation guidelines say the first step in repairing a water-damaged wood floor is to identify and eliminate the source of moisture, and that once the source is removed, the floor can then be assessed. They also warn that, as a hidden condition, the subfloor may be compromised further than the wood floor above it. Our posts on water damage on engineered hardwood and the cost to refinish hardwood or replace it cover the repair decision for a clean-water leak; neither addresses sewage.

SPC vinyl plank

We did not find a manufacturer or standards-body statement saying that a flooded SPC plank floor can be dried and reused, so we do not say that it can. The three SPC floors in our table are marked waterproof: Yes in our catalogue data. That is the listing's label for the plank; it says nothing about the pad, the seams or the slab underneath. Our post is LVP really waterproof explains where water still gets in.

Dry the slab and subfloor before anything goes down

Health Canada's infographic says: "After cleaning, ventilate and dehumidify the house until it is dry to prevent mould growth. Indoor humidity should be between 30 and 50%." We give no meter readings here. Ask your restoration contractor or installer to confirm the slab and subfloor are dry before new flooring goes down.

For concrete, the National Wood Flooring Association says that moisture levels must be evaluated and properly addressed prior to installation of new flooring, and that concrete substrates should be dried by use of airflow, heat, and dehumidifiers until moisture levels are within the ranges the flooring and adhesive manufacturers require. One SPC manufacturer's installation guideline (Shaw's COREtec guide, not the Riche instructions) adds: "Concrete slabs must be dry with no visible moisture." Read the instructions for the exact floor you buy, and see our guide to moisture testing a concrete subfloor for test methods.

Fix the cause first: backwater valve, sump pump and weeping tile

The City of Toronto says: "Every home is at risk of basement flooding, even if it has not happened before." The Government of Canada's prevention pages add that backwater valves, also called sewer backflow valves, help prevent backups. They also say sump pumps rely on a functioning electrical power supply; without power, your sump pump will not work.

Weeping tiles are pipes located underground around a home's foundation, the City explains. Even if your home has a weeping tile system, canada.ca warns, it may not be operational since these systems can become clogged with soil over time. The City says that if your weeping tiles are connected to the sewer system, it is recommended that you disconnect it and install a sump pump and/or backwater valve.

The City of Toronto subsidy: what it pays for and what it does not

The City's Basement Flooding Protection Subsidy Program page (date modified June 18, 2026) says: "As of May 1, 2026, the City expanded the program and is offering up to $6,650 in subsidies per property." The expanded amounts apply to eligible work completed on or after November 12, 2025. We checked the page the day we wrote this; check it again before you spend or apply.

The City lists the eligible work as a home plumbing assessment, installation of backwater valves (up to two) and alarms, installation of a sump pump, alarm and battery backup power, and severance and capping of a storm sewer or external weeping tile connection. Flooring is not on that list, so a floor that is already damaged has to be budgeted separately. The table gives the City's per-item maximums.

Eligible work City's stated maximum Share of invoiced cost
Home plumbing assessment (one time) $500 up to 80 per cent
Backwater valves and alarms (maximum two devices) $1,600 per device up to 80 per cent
Sump pump and alarm (maximum one device) $2,250 up to 80 per cent
Sump pump battery backup $300 up to 80 per cent
Foundation drain (weeping tile) severance and capping $400 up to 80 per cent

The five maximums add up to $6,650: $500 plus two backwater valves at $1,600 each, $2,250, $300 and $400. Treat that as the City's ceiling for a property, not an expected payout, since each line pays up to 80 per cent of the invoiced cost and no more than its maximum.

In the City's own terms, you must be the registered owner of a single-family residential, duplex, triplex or fourplex property within the City of Toronto. Your contractor must have a valid business licence from the City of Toronto. You must submit your application within two years of the installation of each flood protection device or service provided, and the City notes that submitting an application does not guarantee a subsidy.

Which situation are you in?

  • Sewage or wastewater came up a drain. Call your insurer and a qualified professional before you remove anything.
  • Rain or groundwater came in from outside. Find where it got in before you choose a floor.
  • A clean-water leak stayed in one area. Check the slab and subfloor before you decide.

Four replacement floors from our catalogue, with live prices

Once the room is dry and the cause is fixed, here are four in-stock floors to price against each other. They are examples, not a ranking, and not a claim that any of them would come through another flood. To compare basement materials before you buy, see our basement flooring guide; this post does not rank them.

Floor Box price Coverage per box Price per sq ft Waterproof field Thickness and wear layer
Riche Nordic Frost 8mm SPC $37.24 16.55 sq ft $2.25 Yes 8mm, 20mil wear layer
Riche Greige Oak 10mm SPC $38.89 11.82 sq ft $3.29 Yes 10mm, 20mil wear layer
Riche Blonde Sand Oak 6mm SPC $44.68 23.64 sq ft $1.89 Yes 6mm, 12mil wear layer
Swiss Krono Grey Oak 10mm laminate $42.83 17.22 sq ft $2.49 Not listed 10mm, wear layer not listed

Prices checked October 31, 2026. Box prices and coverage come from our current catalogue.

Thickness and wear layer describe how a plank is built, not how it behaves in a flood. The Greige Oak is 10mm with a 20mil wear layer and an EVA pad named in its listing title.

Riche Nordic Frost 8mm SPC vinyl plank flooring, product photo
Riche Nordic Frost 8mm SPC at $2.25 per sq ft

The Greige Oak has the highest price per sq ft of the four.

Riche Greige Oak 10mm SPC vinyl plank flooring, product photo
Riche Greige Oak 10mm SPC at $3.29 per sq ft

The Blonde Sand Oak comes in under the other three at $1.89 per sq ft, with an IXPE pad named in its listing title. A pad is one more layer to inspect if the floor ever gets wet from below. The Swiss Krono laminate carries no waterproof field in our data, and its maker's flood wording is quoted above.

Riche Blonde Sand Oak 6mm SPC vinyl planks on a showroom display with a sample tag
Riche Blonde Sand Oak 6mm SPC at $1.89 per sq ft

Material cost for a 500 sq ft basement floor

Our quote method adds a 5% waste allowance (500 × 1.05 = 525 sq ft), divides by the coverage of one box and rounds up to whole boxes, multiplies by the box price, then adds 13% HST. The totals are material only: no demolition, disposal, drying, subfloor repair, labour, delivery or trim, and no underlayment, which a laminate click floor needs as a separate line.

Floor Boxes Material HST (13%) Total
Riche Nordic Frost 8mm SPC 32 boxes $1,191.68 $154.92 $1,346.60
Riche Greige Oak 10mm SPC 45 boxes $1,750.05 $227.51 $1,977.56
Riche Blonde Sand Oak 6mm SPC 23 boxes $1,027.64 $133.59 $1,161.23
Swiss Krono Grey Oak 10mm laminate 31 boxes $1,327.73 $172.60 $1,500.33

For the Nordic Frost, 525 sq ft divided by 16.55 sq ft per box rounds up to 32 boxes, and 32 boxes at $37.24 is $1,191.68. HST on that is $154.92, for a total of $1,346.60.

Questions about flooring after a basement flood

Can I keep my floor after a sewer backup?

No source we checked says a sewage-soaked floor can stay. Health Canada's instruction on water-soaked flooring is to discard it, and its mould guide names sewage-contaminated floods as a case for a qualified professional.

Will my home insurance pay for new flooring after a sewer backup?

That depends on your policy, and only your insurer can confirm it. Ask before any permanent repair, and check whether you bought the optional sewer backup coverage IBC describes.

Does the City's basement flooding subsidy pay for new flooring?

No, flooring is not among the work the City lists. The program covers prevention work such as a plumbing assessment, backwater valves and a sump pump, with a ceiling of $6,650 per property.

How much does a 500 sq ft basement floor cost in materials?

On the four floors above, material plus HST runs from $1,161.23 for the Blonde Sand Oak to $1,977.56 for the Greige Oak. Removal, drying, labour and delivery are extra.

Get a replacement-floor quote in Toronto and the GTA

When the room is clean and dry and the cause is dealt with, send us your room sizes and what was on the floor, and we will price the new floor with the box-and-HST method shown above. You can request a quote online or use our contact page.

Top Floorings Depot
3781 Victoria Park Avenue, Unit 1, Toronto, ON M1W 3K5
www.topfloorings.com
Call: 416-499-0117
Text: 416-770-8819

Back to Flooring Guides